 |
Material Safety Data Sheet
Multithane Vertical
High Viscosity, Liquid Applied, Polyurethane Membrane For Non-Exposed Areas |
Classified as a hazardous material according to the criteria of the NOHSC.
Identification |
| Product Name: |
Multithane Vertical |
| Other Names: |
Duram Multithane STD Vertical. |
| U.N. Number: |
1263 |
| Class: |
lll |
| Hazchem Code: |
3[Y] |
| Poison Schedule: |
6 |
| Pack Sizes: |
5ltr & 15ltr pails. |
| |
|
|
 |
 |
|
Physical Description |
| Appearance: |
Coloured high viscosity liquid. |
| Boiling Point: |
Approximately 300oC |
| Vapour Pressure: |
Approximately 6.00 (Xylene) |
| Percent Volatiles: |
+-40% |
| Specific Gravity: |
+-1.05 |
| Flash Point: |
28oC (Xylene) |
| Flammability: |
1.1-7.0% |
| Water Solubility: |
Insoluable. |
|
|
|
|
Ingredients |
| Chemical |
CAS No. |
Proportion |
|
| Urethane Polymer.
|
Not known. |
30-60% |
|
|
| Inert Fillers.
|
Not known. |
10-30% |
|
|
| Xylene.
|
1330-20-7 |
30-60% |
|
|
| Minor Ingredients
|
Not known |
<5% |
|
|
|
|
|
|
|
| |
|
|
|
Uses:
Multithane Standard Vertical mostly used for vertical structures such as shower walls, as the formula is more dense then the standard product. Not for use in exposed areas. |
Health Warning Information
Health Effects
Swallowed: Ingestion could cause irritation and burning sensation.
Eyes: Irritation and burning. Long term exposure can cause damage.
Skin: Irritation burning sensation.
Inhaled: Irritation with asthma like symptoms. It is unlikely that the product would be inhaled due to its viscosity. Inhaled matter is likely to be Xylene.
First Aid
Swallowed: Do not induce vomiting. Give milk or water to drink seek medical advise.
Eyes: Flush eyes with copious amounts of clean water, lifting lid to ensure any product trapped will flush away. Seek medical attention.
Skin: Wipe product off skin, wash skin with soap and water. Apply moisturising cream.
Personal Protection: The use of solvent resistant gloves, coveralls and goggles (against splashes) is recommended.
Keep flames, sparks and sources of ignition away from uncured product. Product is flammable.
Advice to Doctor
Treat Symptomatically.
Precautions in Use
Follow normal good industrial hygiene and chemical precautions, particularly in respect of flammability. Use in well ventilated areas and provide flame proof artificial ventilation if required to maintain concentrations below xylene exposure standard of 350g/m2 (TWA) 655 mg/m2 (STEL) or 100ppm.
Keep sparks and ignition sources away from product during application, as product is flammable.
Exposure Limits
Multithane STD Vertical is designed to be tiled or topped within a period of 2 weeks after application.
Multithane STD Vertical is not recommended for prolonged UV exposure.
Ventilation
Good ventilation is recommended.
Personal Protection
The use of solvent resistant gloves, coveralls and goggles (against splashes) are recommended. Keep flame, sparks and sources of ignition away from uncured product.
Vapours may collect in low-lying areas. Ensure adequate ventilation.
Safe Handling Information
Storage and Transport
Store in a cool dry place, away from direct sunlight and ignition sources. Class 3 dangerous goods must be declared prior to delivery.
Suitable containers: Plain metal pails as recommended by manufacturer.
Check containers are labeled and not damaged.
Spills and Disposal
Spills: Remove sources of ignition. Prevent spills from entering drains and waterways. Absorb with sand or oil absorbing material.
discard to suitable landfill in accordance with local council regulations.
Disposal: Shovel into drums, incinerate or land tip in accordance with local regulation.
Fire / Explosion Hazard
Containers should be kept cool with water spray to prevent pressure build up. Burning product may produce dense irritating smoke. Heat may cause cans to rupture.
Issued: 1 May 2007 | Valid to: 31 May 2011
Conditions of Use and Disclaimer
The information contained in this Material Data Sheet is given in good faith based upon our current knowledge and does not imply warranty, express or implied. The information is provided and the product is sold on the basis that the product is used for its intended purpose and is used in a proper workmanlike manner in accordance with the instructions of the Product Data Sheet in suitable and safe working conditions. Under no circumstances will the Company be liable for loss, consequential or otherwise, arising from the use of the product.