duram duramax
 
 
textured coatings waterproofing antislip

Material Safety Data Sheet

Multithane UV HV (High Viscosity)

High Viscosity, Liquid, Polyurethane Waterproofing Membrane For Exposed Areas

Classified as a hazardous material according to the criteria of the NOHSC.

 

Identification

Product Name: Multithane UV HV (High Viscosity)
Other Names: Duram Multithane UV Vert.
U.N. Number: 1263
Class: lll
Hazchem Code: 3[Y]
Poison Schedule: 6
Pack Sizes: 5 ltr & 15 ltr pails.
   

Physical Description

Appearance: Coloured high viscosity liquid.
Boiling Point: Approximately 300oC
Vapour Pressure: Approximately 6.00 (Xylene)
Percent Volatiles: +-40%
Specific Gravity: +-1.05
Flash Point: 28oC (Xylene)
Flammability: 1.1-7.0%
Water Solubility: Insoluable.

Ingredients

Chemical CAS No. Proportion
Urethane Polymer. Not known. 30-60%
Inert Fillers. Not known. 10-30%
Xylene. 1330-20-7 30-60%
Minor Ingredients Not known <5%
     

Uses:

Multithane UV Vertical is ideal to waterproof most applications within the building and construction industry, including:
External walls and wherever a UV vertical grade polyurethane is required. Its main use is for exposed roofs, decks, terraces and gutters.

Health Warning Information

Health Effects

Swallowed: Ingestion could cause irritation and burning sensation.

Eyes: Irritation and burning. Long term exposure can cause damage.

Skin: Irritation burning sensation.

Inhaled: Irritation with asthma like symptoms. It is unlikely that the product would be inhaled due to its viscosity. Inhaled matter is likely to be Xylene.

First Aid

Swallowed: Do not induce vomiting. Give milk or water to drink seek medical advise.

Eyes: Flush eyes with copious amounts of clean water, lifting the lid to ensure any trapped product can be flushed away. Seek medical attention.

Skin: Wipe product off skin, wash skin with soap and water. Apply moisturising cream.

Personal Protection: The use of solvent resistant gloves, coveralls and goggles (against splashes) are recommended.
keep flame sparkes and sources of ignition away from uncured product.

Advice to Doctor

Treat Symptomatically.

Precautions in Use

Follow normal good industrial hygiene and chemical precautions, particularly in respect of flammability. Use in well ventilated areas and provide flame proof artificial ventilation if required to maintain concentrations below xylene exposure standard of 350g/m2 (TWA) 655 mg/m2 (STEL) or 100ppm.
keep sparks and ignition sources away from product during application, as product is flammable.

Exposure Limits

Multithane UV Vertical incorporates anti-oxidants and UV stabilizers specifically formulated to provide UV stability in exposed applications.

Ventilation

Good ventilation is recommended.

Personal Protection

The use of solvent resistant gloves, coveralls and goggles (against splashes) are recommended. Keep flame, sparks and sources of ignition away from uncured product.
Vapours may collect in low-lying areas. insure adequate ventilation.

Safe Handling Information

Storage and Transport

Store in a cool dry place, away from direct sunlight and ignition sources. Class 3 dangerous goods must be declared prior to delivery.
Suitable containers: Plain metal pails as recommended by manufacturer.
Check containers are labeled and not damaged.

Spills and Disposal

Spills: Remove sources of ignition. Prevent spills from entering drains and waterways. Absorb with sand or oil absorbing material,
discard to suitable landfill in accordance with local council regulations.

Disposal: Shovel into drums, incinerate or land tip in accordance with local regulation.

Fire / Explosion Hazard

Containers should be kept cool with water spray to prevent pressure build up. Burning product may produce dense irritating smoke. Heat may cause cans to rupture.
Issued: 1 May 2007 | Valid to: 31 May 2012

Conditions of Use and Disclaimer

The information contained in this Material Data Sheet is given in good faith based upon our current knowledge and does not imply warranty, express or implied. The information is provided and the product is sold on the basis that the product is used for its intended purpose and is used in a proper workmanlike manner in accordance with the instructions of the Product Data Sheet in suitable and safe working conditions. Under no circumstances will the Company be liable for loss, consequential or otherwise, arising from the use of the product.

DURAM INDUSTRIES (PTY) LTD ACN 002 968 809 ABN 77 002 968 809
The Ultimate in Waterproofing & Protective Coating Technology

Duram Offices:
NEW SOUTH WALES: 51 Prince William Drive, Seven Hills, NSW 2147

 Tel (02) 9624 4077  Fax: (02) 9624 4079

QUEENSLAND: Unit4, 29 Collinsvale St Rocklea, QLD 4106

Tel (07) 3255 6478  Fax: (07) 3255 6258

NEW ZEALAND: Unit 3, 65 Elizabeth Knox Place, Mount Wellington, Auckland

Tel (09)   527 0551  Fax:  (09) 527 0552