 |
Material Safety Data Sheet
Resiflex FC 33
Flexible PU Sealant / Mastic in 600ml Sausages |
Classified as a hazardous material according to the criteria of the NOHSC.
Identification |
| Product Name: |
Resiflex FC 33 |
| Other Names: |
Duram Resiflex FC33; PU Sealant |
| U.N. Number: |
1263 |
| Class: |
lll |
| Hazchem Code: |
3[Y] |
| Poison Schedule: |
6 |
| Pack Sizes: |
600ml Sausages.Cartons of 12 sausages |
| |
|
|
 |
 |
|
Physical Description |
| Appearance: |
Coloured high viscosity liquid. |
| Boiling Point: |
Approximately 300oC |
| Vapour Pressure: |
Approximately 6.00 (Xylene) |
| Percent Volatiles: |
+-40% |
| Specific Gravity: |
+-1.05 |
| Flash Point: |
28oC (Xylene) |
| Flammability: |
1.1-7.0% |
| Water Solubility: |
Insoluable. |
|
|
|
|
Ingredients |
| Chemical |
CAS No. |
Proportion |
|
| Fillers - Calcium carbonate
|
N/A |
< 30% |
|
|
| Aliphatic urethane in Aqueous solution
|
N/A |
< 10% |
|
|
| Acrylic Copolymer Emulsion
|
N/A |
< 40% |
|
|
| Minor ingredients
|
N/a |
< 3% |
|
|
| Water
|
7732-18-5 |
< 10% |
|
| |
|
|
|
Uses:
Resiflex FC 33 used in conjunction with Duram membranes is ideal to waterproof most applications within the building and construction industry, including:
Shower and other wet areas. |
Health Warning Information
Health Effects
Swallowed: Ingestion could cause irritation and burning sensation.
Eyes: Irritation and burning. Long term exposure can cause damage.
Skin: Irritation burning sensation.
Inhaled: Irritation with asthma like symptoms. It is unlikely that the product would be inhaled due to its viscosity. Inhaled matter is likely to be Xylene.
First Aid
Swallowed: Do not induce vomiting. Give milk or water to drink seek medical advise.
Eyes: Flush eyes with copious amounts of clean water.Seek medical attention.
Skin: Wipe product off skin, Wash skin with soap and water. Apply moisturising cream.
Personal Protection: The use of solvent resistant gloves, coveralls and goggles (against splashes) are recommended.
keep flame sparks and sources of ignition away from uncured product.
Advice to Doctor
Treat Symptomatically.
Precautions in Use
Follow normal good industrial hygiene and chemical precautions, particularly in respect of flammability. Use in well ventilated areas and provide flame proof artificial vetilation if required to maintain concentrations below xylene exposure standard of 350g/m2 (TWA) 655 mg/m2 (STEL) or 100ppm.
keep sparks and ignition sources away from product during application, as product is flammable.
Ventilation
Good ventilation is recommended.
Personal Protection
The use of solvent resistant gloves, coveralls and goggles (against splashes) are recommended. keep flame, sparks and sources of ignition away from uncured product.
Vapours may collect in low-lying areas. insure adequate ventilation.
Safe Handling Information
Storage and Transport
Store in a cool dry place, away from direct sunlight and ignition sources.
Spills and Disposal
Discard to suitable landfill in accordance with local council regulations.
Disposal: Shovel into drums, incinerate or land tip in accordance with local regulation.
Issued: 1 May 2007 | Valid to: 31 May 2012
Conditions of Use and Disclaimer
The information contained in this Material Data Sheet is given in good faith based upon our current knowledge and does not imply warranty, express or implied. The information is provided and the product is sold on the basis that the product is used for its intended purpose and is used in a proper workmanlike manner in accordance with the instructions of the Product Data Sheet in suitable and safe working conditions. Under no circumstances will the Company be liable for loss, consequential or otherwise, arising from the use of the product.